|
2011-06-14 12:16:41 (16399 views) The folks at Mature Metal are producing the first prototype of a metallic chastity device designed to be compatible with the DreamLover 2000 Male Management System.
The design of the Watchful Mistress is being modified and customized as follows:
- Locking collar drilled out to accept pin with heat shrink
- pin tapped to accept first security screw
- cage tapped to accept second security screw
- locking hole customized to 1/8 inch diameter (for plastic locks)
The total cost is 420$ (380$ + 40$ for the medium security screw)
All thanks to experiments carried out so far by Q, the pilot run user who previously posted the very first (and still the most comprehensive) DreamLover 2000 review on his blog (here, here and here).
The prototype will be ready in 3 weeks, and if testing is successful this modified model will likely be available for ordering to everyone.
2011-06-13 06:30:58 (26212 views) In-house experimentation and user prototypes have revealed that metallic chastity devices do not pose any fundamental problem to installation of the DreamLover 2000 as long as a few precautions are taken.
Initial concern
Essentially our initial concern was that a fully metallic chastity device housing would alter the current path, because its surface is necessarily in contact with the entire shaft of the penis as opposed to just the tip, which is where the DreamLover 2000's glans electrode is placed.
Having insulated the ring portion from the housing, there would be a small area of skin caught between these two conductive parts, which could potentially become a current path, and disrupt the pulse by making it travel through outer skin layers, instead of traversing the penis. This would yield an electrical stinging sensation, as opposed to our characteristic pulse, and require pulse parameters to be tweaked through the configuration screen.
However, all this has been shown not to be the case.
Latest results
From our latest experiments, we were able to verify that as long as part of the metallic housing is in contact with the tip of the penis, such as the underside of the glans, under any foreskin, current will flow properly between the desired contact points, yielding the unique DreamLover 2000 pulse sensation which is akin to a physical impact.
Current is known to travel along the path of least resistance, so we are not terribly surprised by this result - we knew there was a chance of this happening, but since we're dealing with multiple layers of tissue with different resistance we hesitated to reassure people until tests were properly carried out.
Metallic device installation
What this means is that for metallic chastity device users, all you need to do in order to connect a DreamLover 2000 unit to your device is:
- insulate the ring portion from the housing/cage portion (with heat shrink tubing, plastidip, tape etc)
- Find a way to attach the DreamLover 2000's ring terminals to the two parts of the chastity device
The exact procedure will vary for each chastity device, but we already have a user working on a tutorial.
Foreskin issues
Previously, users with a foreskin were told they'd be unable to experience the true DreamLover 2000 current pulse unless they could pull back the foreskin and ensure contact between the glans electrode and the area around the glans.
However, with a metallic chastity device in which the whole housing/cage portion serves as an electrode, the surface contact area between the penis shaft and the cage is actually large enough that users with a foreskin do not need to worry about glans contact at all.
When there is no direct contact between the more sensitive areas around the glans and the metallic housing/cage, the pulse is mostly felt on the scrotum, and has the same distinctive feel as in the regular configuration.
Penis detector
- It is much easier to short the electrodes when the whole cage is metallic. Fortunately, the Penis Detector (DreamLover 2000 Pro) senses, reports and remembers this type of tampering
- No program changes seem to be required for the Penis Detector to accurately sense good electrode contact for foreskin users with a metallic device. The amount of current going through the penis in this configuration is sufficient, and is measured correctly too.
2011-06-12 02:43:24 (10517 views) DreamLover Laboratories is currently scouting for a few Male Training Therapists, obedience oriented personal trainers, and Male Training Coaches.
Requirements:
- Female
- Passion for Male Training and education
- Ability to guide the male through a process of learning and self-improvement and develop his obedience muscles.
- Basic website navigation and IM skills
- Ability to go through a brief tutorial to learn how to operate our Male Management panel
The role involves coaching and monitoring remote DreamLover 2000 users who sign up for this service, and administering positive and negative feedback (as the case requires and as the trainer sees fit).
This position is part-time, does not involve a minimum time commitment, and you can work your own hours. The offer involves compensation.
If interested, please inquire within.
2011-06-01 08:47:26 (12760 views) The DL2K-LINK and the DL Uplink software are now confirmed to work on a Macintosh computer through both VMWare and Parallels.
2011-05-30 02:31:41 (14998 views) DREAMLOVER 2000 LITE
We are now exploring our market with one additional DreamLover 2000 package, the DreamLover 2000 Lite. If market support is sufficiently strong for this new package, it will become a permanent addition to our product line. Read a full feature comparison and the pricing information.
The fully featured DreamLover 2000 that the pilot run customers have ordered is referred to as the DreamLover 2000 Pro to distinguish it from the lite version.
PENIS DETECTOR
The DreamLover 2000 now has a very convenient way of sensing proper electrode contact. This feature is only available on Pro units. It reports good contact, bad contact, no contact (device not worn) and even shorted electrodes. Status is shown for each pulse and as an aggregate. The importance of this new addition cannot be overstated; it makes the DreamLover 2000 device tamper evident. Not only is proper pulse delivery reported at each pulse activation, but it is also possible to query the device to verify if previous tampering has occurred.
Details can be found here.
NEW DL UPLINK RELEASE
The DL Uplink has been updated and you will need to download the new version in order to connect. We've just uploaded dozens of new files so if you experience any difficulties let us know.
PILOT RUN CUSTOMERS:
Pilot run customers may need to request a firmware upgrade from the DL Uplink's device configuration screen. This will enable the Penis Detector and update the status of your account which will be tagged with "Pro" status so that all the features remain accessible. The steps are:
- download the new DL Uplink
- open the device configuration screen
- go to the Firmware tab
- click "request download code"
- there, enter the order ID
In case of difficulties, e-mail or skype as usual.
2011-05-22 04:46:44 (20046 views) A pilot run member from Germany has submitted a few photographs of his adaptation of the DreamLover 2000 for the Latowski chastity belt.
This is the picture that most clearly showed how the DreamLover 2000's enclosure is now embedded into the inner rubber chamber of the Latowski. With some luck we will be able to get more detailed photographs showing how the electrodes were connected as well.
Modifications involved cutting the enclosure, splicing cables and direct modifications to the circuit board so we're not claiming compatibility between these two devices, but simply reporting a successful DIY attempt.
|
