<< return to blog entries
2010-11-29 03:54:40 (7834 views) Our current electrodes were chosen among a variety of conductive metallic parts. In this choice we focused exclusively on the "feel" and comfort of the electrodes.
Other alternatives exist. A couple of weeks ago we were experimenting with a "Tesla" DL2000 which uses spring electrodes.
This far cooler looking alternative turned out to be less comfortable on the scrotum when sitting, and to add a slight "electric sting" feeling to the pulse (due to the smaller contact area on the bottom electrode).
We have many good looking electrodes at our disposal including some that look like jewelry. They all work. However, the large contact area of our default electrodes (the S-shaped and round parts on the upper left) gives the DL2000 its unique feeling and all other bottom electrodes reduce this property by 20-30% depending on anatomy and positioning of the penis inside the cage.
If we ever create custom metallic parts the lower electrode will probably look similar to what we have now. Perhaps a bit thinner, and curved, but necessarily of similar size. This is a long due clarification as some have pointed out the electrodes may be the most "low tech" parts in our product; however they really are the best performing ones.
Comments
Post new comment
|